Atd><Mem><N> Mobile Originated Call Using Specific Memory And Index Number - Siemens TC63 Command Set

TC63 AT Command Set
7.4 ATD><mem><n>
7.4 ATD><mem><n> Mobile originated call using specific memory
and index number
Syntax
Exec Command
ATD><mem><n>[<mgsm>];
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK
Reference(s)
V.250
Command Description
TA attempts to set up an outgoing call to the specified number. The termination character ";" is mandatory since
dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services
or other functions.
Parameter Description
(str)
<mem>
Phonebook storage:
For detailed description of storages see AT+CPBS.
"FD"
"SM"
"ON"
"ME"
"LD"
"MC"
"RC"
(num)
<n>
Integer type memory location in the range of locations available in the selected memory, i.e. the index number
returned by AT+CPBR.
(str)
<mgsm>
String of GSM modifiers:
I Activates CLIR (disables presentation of own phone number to called party)
i Deactivates CLIR (enables presentation of own phone number to called party)
TC63_ATC_V00.490
Confidential / Draft - Do not copy
PIN
%
Fixed dialing phonebook
SIM phonebook
MSISDN list
Mobile Equipment Phonebook
Last number dialed phonebook
Missed (unanswered received) calls list
Received calls list
Page 144 of 501
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
% § % %
s
Last
§ § ! ! !
5/24/05