Setting Up The Partitions Under Windows Xp Professional - Siemens SIMATIC IPC427C Operating Instructions Manual

Maintenance and Service
11.3 Partitioning data media
11.3.2

Setting up the partitions under Windows XP Professional

You need to set up the partitions on the CompactFlash card after installing a new drive, to
repair corrupt partitions or to change the partitioning.
Partitioning the hard disk
The factory state of the hard disk with Windows XP Professional includes the following
partitions:
Partition
1. Partition
2. Partition
Partitioning the SSD drive
The following partitions are configured in the factory state of the SSD drive with Windows XP
Professional:
Partition
1. Partition
2. Partition
To restore the original partition to its factory state, we recommend the software tool SIMATIC
PC/PG Image Creator. Detailed information about using this tool is available in the
manufacturer documentation.
82
Name
SYSTEM
DATA
Name Size
SYSTEM 15 GB
DATA Remainder
Size
25 GB
Remainder
Operating Instructions, 04/2009, A5E02414743-01
File system
NTFS (not compressed)
NTFS (not compressed)
File system
NTFS (not compressed)
NTFS (not compressed)
SIMATIC IPC427C