Navigating In The Menus - TANDBERG C20 PLUS User Manual

Getting started
What's in this guide? Getting started

Navigating in the menus

Use the remote control to operate your TANDBERG video system. A few
basic navigation principles are all you need to know to get started.
• Press the key ( ) to show the Home menu.
home
• The keys in the center of the upper part of the remote control are
arrow
used to navigate in the menus.
• When the system shows the Home menu only (see the Fig. below),
pressing key ( ) will hide the menu. To bring it back, press the
home
key ( ) again.
home
• In an input field, pressing will delete characters/numbers to the left of
the cursor position.
Press the key to display the Home menu on the screen.
The element currently
selected is indicated by
an orange rectangle.
Use the and
arrow
keys to navigate up and
down in a menu.
If there is no menu shown...
Wake up the system by lifting the remote control and press the
Home menu.
D1458203 USER GUIDE Profile Series, Codec C Series, Quick Set C20 / C20 Plus (TC3)—March 2010
Making calls Using the phone book
The little
triangle
indicates that
a submenu is
available.
key to display the
7
In-call features
Example showing a submenu displayed by pressing the right arrow key.
Use the key key to collapse
arrow
the menu expansion (to go back one
level).
Softkeys not used in a given
context are shown ghosted
(grey).
Advanced settings
The little triangle ( ) indicates
that there are further submenus
available. Use the key or
arrow
to show this submenu.
Use the key ( ) to exit all menus
home
and return to showing the Home menu
only.
Context sensitive softkeys
corresponding to the
function keys of the remote
control.