Resetting To Factory Settings - Topfield TF 6000 PVRt User Manual

You should set the Search Mode option to Auto at the first ser-
vice search after connecting the digital receiver. The digital re-
ceiver will search all available services with automatic search
mode. Transponder numbers range from 6 to 12 at VHF and
28 to 69 at UHF.
To search a certain transponder, set the Search Mode option
to Manual, and select your desired transponder at the Channel
option.
You can search pay services as well as free services. To search
only free services. set the FTA/Scrambled option to FTA only.
FTA means free service. To search only pay services, set it to
CAS only. CAS means pay service. To search both free services
and pay services, set it to FTA + CAS.
To start service search, select the Service Search command.
Then appears a list box, in which found services will be listed.
Press the
search has been completed. To stop service search on the way
or exit without saving, press the

4.2 Resetting to factory settings

The digital receiver maintains the following data:
•
•
•
•
You can reset all data of the digital receiver. To reset all the
data, select the Installation > Factory Setting menu. Then a
confirmation box appears. With the Yes reply, service entries,
favorite entries and timer events will be all deleted, and pref-
erence options will be reset to the manufacturer's factory set-
tings.
4.2 Resetting to factory settings 27
£
¢ ¡
button to save found services when a service
OK
Service list
Favorite list
Timer events
Preference settings
£
¢ ¡
button.
EXIT