Oregon Scientific DS9300 User Manual page 34

9300 Eng Manl(1-49p
You can adjust the monitor brightness in the range of 1~4.
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1 = Monitor- Darker
4 = Monitor- Lightest
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. Press " " button to display the menu.
2. Use " "or " " button to select this mode (
3. Use " "or " " button to select the grade.
4. When you have finished setting, press "
You can set the date from 5 types of this mode:
M1 = DD / MM / YY
M2 = YY / MM / DD
M3 = DD / MM / YY / HH / MM
M4 = YY / MM / DD / HH / MM
M5 = NON-DISPLAY
1. Press " " button to display the menu.
2. Use " "or " " button to select this mode (
3. Use " "or " " button to select M1 or M2 or M3 or M4 type.
4. Press button to setup.
5. Use " "or " " button to select the desired item and then use" "or
" " button to correct the setting.
6. If you do not want the date displayed on photos select M5.
7. When you have finished the setting, press
the menu.
29
).
" button to exit.
).
button to return
29
25/3/03, 3:15 AM