Advertisement
Quick Links
C-91-M3-G-A User Guide:Fold Out
17/4/09
15:36
Page 1
Bagless cylinder
15
13a
3
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
13b
16
C91-M3 Series
instruction manual
GB
Vax model number:
4
5
5
17
6
14
3
4
7
12
8
Parts Overview
16 Telescopic Tube
9
3
2
The Accessories
11
13 2-in-1 Tool
10
2
a. Dusting Brush: For delicate surfaces.
b. Upholstery Tool: For carpet, upholstery
17 TurboTool
1
and stairs etc.
14 Crevice Tool
For crevices, corners and cracks.
1. Parts Overview
6 Dirt container release button
15
TurboBrush
Press the release button and the dirt
18 Hose
Vacuums carpets & grooms pile.
The Unit
container can be lifted and removed off
Great for picking up pet hair.
the unit.
1 On/Off Button
19 Hard Floor Tool
Insert the plug into the electrical outlet.
7 Auto cord rewind
Press the on/off switch on the top of
To rewind the power cord, press the
the vacuum cleaner, to switch the
cord rewind button located at the rear
vacuum cleaner on and press the
of the vacuum cleaner.
button again to turn the vacuum
KEEP YOUR VAX LIKE NEW!
!
8 Floor Tool parking storage
cleaner off.
For convenience there is a parking slot
20 Foam Pre-Motor Filter
2 Dirt Container
located at the rear of the vacuum
21 Fibre Pre-Motor Filter
Locked on to the top of the unit.
cleaner where the Floor Tool can be
22 Antibacterial Post-Motor Filter
3 Cyclone separator
parked for carrying and storage.
Located inside of the Dirt container.
9 Post Motor filter cover
!
IMPORTANT: The condition of the filters affects the
Slide the latch across to gain access to
4 Pre-motor filter cover
performance of your vacuum cleaner. Please check
the filter.
Push the handle catch up to gain
and wash filters periodically (depending on level of
access to the filter.
10 Plug
use). For full cleaning instructions see page 4.
Replacement filter kits are available on: www.vax.co.uk
5 Dirt container /Carry handle
11 Dirt bin quick release button
Use the carry handle located on the top
Hold the dirt bin container over a bin
To replace or purchase parts
of the dirt bin to move the vacuum
and press the release button.
for your vacuum cleaner,
cleaner from room to room.
12 Hose inlet
please visit our website:
vax.co.uk
Retain this guide for future reference.
vax.co.uk
(UK) 0844 412 8455 (ROI) 1-800 928 308
2. Assembling the vacuum cleaner
6. Dirt Container: Maintenance
18
16
16
IMPORTANT : Always switch off and unplug the vacuum cleaner from the electrical
!
18
16
outlet before removing the Dirt Container.
18
12
Emptying the Dirt Container
CLICK!
15
3. Choose the attachments for the job:
19
CLICK!
Cleaning the Cyclone Separator
The telescopic tube can be lengthened
or shorted by pushing the button in and
IMPORTANT: Remove the Dirt Container
13
14
17
15
19
!
sliding the tube apart or together as
from the unit and dispose of the dirt
required.
inside the container before cleaning.
4. Operating the appliance
Great for picking up pet hair, vacuuming
NOTE: Fully unwind the
WARNING: Always
stairs & upholstery.
!
power cord. A yellow mark
switch off and
NOTE: Do not use the TurboTool on
on the power cord
unplug the vacuum
suede and leather surfaces.
indicates the
cleaner from the electrical
outlet before assembling,
recommended cord length.
Tool caddy on handle for tool storage.
opening or emptying the dirt
Do not exceed the cord
container, or before
length beyond the red
mark
connecting/ disconnecting
.
For parquet and laminate flooring.
the attachments.
7. The Filters: Maintenance
5. Packing away and storage
Your Filters:
IMPORTANT: Always unplug the vacuum from the electrical outlet and rewind the
IMPORTANT: Your vax vacuum cleaner is fitted with high performance filters it is essential
!
!
power cord as directed before storing.
that these are well maintained and cleaned according to the following instructions.
20
21
22
IMPORTANT : Do NOT use the vacuum
!
without ALL of the filters in place.
Vax recommends that the pre- and post-
motor filter should be checked and cleaned
periodically depending on the frequency of
use and the volume of dirt being picked up
on each occasion.
NOTE: When rewinding the power cord, guide the cord with one hand, This will prevent the
If your Vacuum Cleaner or
cord from whipping which could cause damage or injury.
Once completely dry, return the pre-motor filters and case to the vacuum cleaner.
Accessories are Damaged/Faulty
Replace the pre-motor filter cover before restarting the vacuum cleaner.
NOTE: For convenience there is a parking slot located at the rear of the vacuum cleaner where
Please Call our Vax Careline on:
the floor tool and hose can be parked for carrying and storage.
FAQs
Cleaning the Pre-Motor Filter
24
Is there an accessory missing?
CLICK!
CLICK!
• check the 'Parts Overview' page in this
guide to make sure that the part is
Cleaning the Post-Motor Filter
definitely included with your unit.
• If it is missing, please call our Vax Careline
24
to order a replacement:
visit vax.co.uk to order online.
Why won't the vacuum cleaner pick up?
8. Cleaning Blockages
IMPORTANT : The cyclone separator should
• The filters may be clogged: Refer to 'The
not be submerged in water.
Filters: Maintenance' (Page 4).
Turn the vacuum cleaner off and unplug from the electrical outlet.
• The Dirt Container is full or blocked: Refer
HOSE BLOCKAGES: The flexible hose may be disconnected from the vacuum cleaner by pressing the clip
to 'Dirt Container: Maintenance' (Page 4).
on the connector and pulling away from the machine. Carefully remove any blockages found and
• The Dirt Container may be incorrectly
reconnect the hose securely.
installed: Refer to 'Dirt container:
Maintenance' (Page 4).
ACCESSORY BLOCKAGE: Remove the accessories from the cleaner, carefully remover the
blockage and return to the cleaner.
Clearing Debris from the TurboTool
Why is dust escaping from the vacuum?
• The filters may not be installed correctly.
Refer to 'The Filters: Maintenance' (Page 5).
• The Dirt container may be incorrectly
installed: Remove the Dirt Container from
NOTE : Both Pre- and Post-Motor Filters can
the unit by pressing the Dirt Container
be rinsed in warm water (max 40°C). Allow to
Release Button (6) and reattach it to the
air dry for 24 hours before replacing. Do NOT
Removing debris from the TurboBrush
unit, ensuring it is locked firmly back into
use any detergents or boiling water to wash
place.
The brushbar will stop rotating if it is blocked during operation
filter.
by vacuuming up foreign objects, or if strands of carpet are
• The filters may be clogged: Refer to
'The Filters: Maintenance' (Page 4).
wrapped around it. Switch the vacuum cleaner off and
disconnect the power plug from the electrical outlet.
Lay the TurboBrush floor head on a flat surface and turn over
to expose the brushbar. Using a pair of scissors, cut through
any threads or hairs caught by the brushbar that have
wrapped around the guides.
Safety Information
13. Do not pick up flammable or combustible materials
(lighter fluid, petrol, kerosene, etc) or use in the
presence of explosive liquids or vapours.
For Household Use Only
14. Do not vacuum up harmful or toxic material
WARNING: to reduce the risk of personal injury, unplug the vacuum cleaner before
!
(chlorine bleach, ammonia, drain cleaner, etc).
performing maintenance/troubleshooting checks.
When using the vacuum cleaner, basic safety
precautions should always be observed, including
15. Do not vacuum up hard or sharp objects such as
the following:
glass, nails, screws, coins, etc.
What do I do if an accessory/the unit
1.
Only use the vacuum cleaner indoors on dry
16. Do not use without the filters in place.
becomes damaged or broken?
surfaces.
17. Take extra care when vacuuming on stairs.
2.
Turn off the vacuum cleaner controls before
• Visit www.vax.co.uk for parts and spares.
18. Keep vacuuming area well lit.
connecting or disconnecting from the mains
19. Store the vacuum cleaner indoors in a cool, dry area.
• Please call our Vax careline to purchase
supply.
20. Turn off the on/off switch before unplugging
new spares or order a replacement:
3.
Always unplug the vacuum cleaner before
the vacuum cleaner.
0844 412 8455
0844 412 8455
connecting or disconnecting the vacuum hose
21. Use only CE-approved 13 amp extension cords.
and accessories.
Non-approved extension cords may overheat.
4.
Children should be supervised to ensure that
Care should be taken to arrange the cord so
Why won't the accessories pick up
they do not play with the appliance.
that the cord cannot be pulled or tripped over.
properly?
5.
This appliance is not intended for use by
WARNING: Always switch off and unplug
!
persons (including children) with reduced
• The accessory may be blocked: Refer to
the vacuum cleaner from the electrical outlet
physical, sensory or mental capabilities, or lack
'Cleaning Blockages' (Page 5).
before assembling, opening or emptying the dirt
of experience and knowledge, unless they have
container, or before connecting/disconnecting the
• The accessory may be faulty: call our
been given supervision or instruction
attachments.
Vax Careline to order a replacement:
concerning use of the appliance by a person
CAUTION: The vacuum cleaner is a very
responsible for their safety.
!
0844 412 8455
powerful unit. Before plugging the cord into
6.
Use only as described in this manual.
the electrical outlet, make sure the switch is in the
Use only the manufacturer's recommended
'off' position. Hold the vacuum cleaner firmly when
attachments.
Why will the vacuum cleaner not run?
starting and in use.
7.
Do not use the vacuum cleaner if it has been
IMPORTANT: If the inlet, hose or telescopic
• It may not be plugged into the electrical
dropped, damaged, left outdoors or dropped into
!
tube is blocked, switch off the vacuum
outlet correctly: Ensure that the plug is
water. Do not use the vacuum cleaner with a
cleaner and remove the blockage(s) before
damaged cord or plug. If the supply cord or plug is
pushed into the electrical outlet securely.
re-starting the vacuum cleaner.
damaged, return the vacuum cleaner to a Vax
• The electrical outlet may not be working:
Authorised Service Agent or suitably qualified
IMPORTANT: Washing filters improves
!
Check the fuse or breaker and consult an
person for examination, repair or adjustment.
vacuum performance. Make sure all the
filters are completely dry before inserting back into
electrician.
8.
Do not pull or carry by the cord. Do not use the
the vacuum cleaner.
cord as a handle, close a door on the cord or pull
• The motor Thermostat may have tripped:
the cord around sharp edges or corners. Do not
This vacuum cleaner is intended for household use
Switch off and unplug the vacuum cleaner.
run the vacuum cleaner over the cord. Keep the
only and not for commercial or industrial use.
Leave for one hour before switching the
cord away from heated surfaces.
vacuum cleaner back on.
9.
Do not handle the plug or vacuum cleaner with
Motor Thermostat
wet hands. Do not use outdoors or on wet
IMPORTANT: The motor is equipped with a
surfaces.
!
thermal cut-out. If for any reason, the
If none of these questions apply to you, or
10. Do not put any objects into openings. Do not
vacuum cleaner should over-heat, the thermostat
use with any openings blocked and do not
for further assistance please call our Vax
will automatically turn the unit off. Should this
restrict air flow. Keep all openings free of dust,
Careline team on:
0844 412 8455
occur, unplug the vacuum cleaner from the
lint, hair or anything that may reduce airflow.
electrical outlet and turn off the switch. Remove
11. Keep hair, loose clothing, fingers and all parts of
the dirt container and empty. Clean the filters.
Allow the cleaner to cool for approximately one (1)
the body away from openings and moving parts.
hour. To re-start, plug into an electrical outlet and
12. Do not pick up hot coals, cigarette butts,
switch back on.
matches or any hot, smoking or burning objects.
Vax Careline: (UK) 0844 412 8455
(ROI) 1-800 928 308
Monday-Friday 8.30am to 6.30pm Saturday-Sunday 9.00am to 5.00pm
Any queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the UK
national rate.
Please make a note of the model number and serial number of your Vax before calling. There
are over 400 approved Vax Service Agents in the UK. For the nearest Vax Service Agent,
please call the Vax Careline or visit vax.co.uk
Technical Specification
Voltage:
220 - 240 ~ 50 Hz
Wattage:
1400W
Subject to technical
change without notice
Capacity:
1.5 litres approx
Filters:
Cyclone separator – wipe clean
Pre-motor filter – washable
HEPA Post-motor filter – washable
Cord Length:
6m (approx)
Weight:
5.5 Kg (approx)
EEC STATEMENT OF COMPLIANCE
Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the
C91-M3 Series Mach 3 range is manufactured in compliance with the following Directives:
Safety: 2006/95/EC Low Voltage Directive EMC: 2004/108/EC Electromagnetic Compatibility Directive
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Advertisement
