Defining The Priority Phone - Vauxhall Movano Infotainment Manual

80 Phone
CD35 BT - Manual connection
To change the phone connected to
the handsfree phone system, press
the SETUP / TEXT button and select
Bluetooth connection (or press the
TEL button when no device is
connected). The device list shows the
phones already paired.
Select the desired phone from the list
and confirm by turning and pressing
the central rotary knob. A display
message confirms phone connection.
Disconnecting a phone
If the mobile phone is switched off, the
phone is automatically disconnected
from the handsfree phone system.
During disconnection, if a call is
already in progress, the conversation
will automatically switch to the mobile
phone.
R15 BT / CD15 BT - Disconnecting a
phone
To disconnect a phone from the
Infotainment system, press the TEL
button (or the SETUP button) and
select Bluetooth connection. Select
the desired device from the device list
then select Disconnect the device by
turning and pressing the OK rotary
knob. A display message confirms
phone disconnection.
CD30 BT - Disconnecting a phone
To disconnect a phone from the
handsfree phone system, press the
0 button and select Bluetooth
connection from the settings menu.
Select Disconnect the device and
confirm by pressing the rotary knob.
A display message confirms phone
disconnection.
CD35 BT - Disconnecting a phone
To disconnect a phone from the
Infotainment system, press the
SETUP / TEXT button and select
Bluetooth connection. Select the
desired device from the device list
then select Disconnect the device by
turning and pressing the central
rotary knob. A display message
confirms phone disconnection.

Defining the priority phone

R15 BT / CD15 BT - Defining the
priority phone
The priority phone is the last
connected phone.
When the ignition is switched on, the
handsfree phone system searches
first for the priority paired phone.
Searching continues until a paired
phone is found.
CD30 BT - Defining the priority phone
If defined, when the ignition is
switched on, the handsfree phone
system searches first for the priority
paired phone.
To define the priority phone, press the
0 button and select Bluetooth
connection from the settings menu.
The device list shows the phones
already paired.
Select the desired phone from the
device list, then select Define priority
(number) and confirm by pressing the
rotary knob.