Vauxhall Ampera Owner's Manual page 74

location is required for this mode.
Also, if the selected electric rate
settings result in a very long charge
completion time, the vehicle will start
charging immediately upon plug-in.
For example, if the electric rate table
is setup with all peak rates and the
rate preference is to charge during
off-peak rates only, then the vehicle
will start charging immediately upon
plug-in.
Charge mode selection
From the charge mode status screen,
press Change Charge Mode.
Select one option:
■ Immediately upon plug-in
■ Delayed based on departure time
■ Delayed based on electric rates &
departure time
Departure time entry
From the delayed charge mode
status screen, press Edit to change
the departure time for each day of the
week.
1. Press the day to change.
2. Press + or − to change the hours
and minutes.
3. Press Back to store changes and
return to the previous screen.
Instruments and controls
Charge level selection
The charge level preference setting
allows the customer to select their
vehicle's charge level so it matches
the capability of their charging
location. If the vehicle consistently
stops charging after plugging in, or if
a circuit breaker continues to trip,
reducing to a lower charge level
preference may resolve the issue.
The charge level preference should
be configured to match the electrical
current rating for the AC outlet that the
charge cord is connected to. The
charge level preference settings are:
■ Maximum - 16 Amps: Limits AC
current to 16 ampere
■ Reduced Level 1 - 12 Amps: Limits
AC current to 12 ampere
73