Automatic light control function
When the automatic light control
function is switched on and the
engine is running, the system
switches between daytime running
light and headlight in dependence of
the lighting conditions.
Daytime running light
Daytime running light increases
visibility of the vehicle during daylight.
Tail lights are not on.
Automatic headlight activation
During poor lighting conditions the
headlights are switched on.
Tunnel detection
When a tunnel is entered the
headlights are switched on without
delay.
Adaptive forward lighting 3 106.
High beam
To switch from low to high beam,
push lever.
To switch to low beam, push lever
again or pull.
Headlight flash
To activate the headlight flash, pull
lever.
Lighting
Headlight range adjustment
Manual headlight range
adjustment
To adapt headlight range to the
vehicle load to prevent dazzling: turn
thumb wheel to required position.
0 = front seats occupied
1 = all seats occupied
2 = all seats occupied and load
compartment laden
3 = driver's seat occupied and load
compartment laden.
Dynamic automatic headlight
levelling 3 106.
105