Prohibition On Alterations; Information On Installation And Operation; Intended Use - Vaillant geoTHERM exclusive Operating Manual

2.2

Prohibition on alterations

d Danger!Inappropriate alterations can
cause injuries!
Under no circumstances should you at-
tempt to make changes or alterations to
the heat pump or other parts of the
heating and hot water system yourself.
The prohibition applies to:
— geoTHERM exclusive heat pumps,
— the Vicinity of geoTHERM exclusive heat pumps,
— the Supply lines for water and power.
For alterations to the heat pump or its peripherals, you
must call on a qualified engineer.
• Do not damage or remove seals or locking devices on
components. Only suitably qualified heating engineer
or our customer service may remove sealed compo-
nents.
Operating Manual geoTHERM exclusive VWS 0020071929_00
Information on the installation and operation 3
3 Information on installation and
operation
Vaillant geoTHERM exclusive heat pumps are built using
state-of-the-art technology and according to standard
safety regulations and must be installed by a qualified
expert technician taking the applicable specifications,
regulations and guidelines into account.
d
3.1
Vaillant heat pumps are built using state-of-the-art tech-
nology and according to standard safety rules and regu-
lations. Nevertheless, there is still a risk of injury or
death to the user or others or of damage to the device
and other property in the event of im-proper use or use
for which it is not intended.
This unit is not intended for use by persons (including
children) having limited physical, sensory or mental ca-
pacities or who have inadequate experience and/or
knowledge, unless supervised by a person responsible
for their safety or who has been given instructions from
them as to how to operate the unit.
Children must be supervised to ensure that they do not
play with the unit.
The units are intended as heaters for closed hot-water
central heating installations and for hot water genera-
tion. Any other use or extended use is considered to be
improper. The manufacturer or supplier is not liable for
any resulting damage. The user alone bears the risk.
It is also considered as intended use to observe:
— the operating and installation instructions
— all other applicable documents
— adherence to the inspection and care conditions.
Safety instructions 2
Danger!
Risk to life as a consequence of using
unqualified personnel!
Installation, inspection and repair may
only be carried out by a qualified engi-
neer. In particular, working on the elec-
trical components and on the coolant
circuit requires an appropriate qualifica-
tion.

Intended use

5