Measuring Resistance - UNI-T UT803 Operating Manual

C. Measuring Resistance (see figure 5)
Warning
To avoid damages to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before measuring resistance.
To avoid harms to you, please do not attempt to input
voltages higher than 60V DC or 30V AC.
To measure resistance, connect the Meter as follows:
1 . Insert the red test lead into the
black test lead into the COM terminal.
2 . Set the rotary switch to
button to select
3 . Connect the test leads across with the object being
measured. The measured value shows on the display.
20
terminal and the
, press SELECT
measurement mode.
Model UT803: OPERATING MANUAL
(Figure 5)