Table of Contents
Advertisement
2.11 – Memory Installation Procedure
When you install the memory modules, make sure the module aligns properly with the memory
slot. The modules are keyed to ensure that it is inserted only one way. The method of installing
memory modules are detailed by the following diagrams.
Once the memory modules are firmly seated in the slot, two latches on either side will close and
secure the module into the slot. Sometimes you may need to close the latches yourself.
To remove the memory module, simply push the latches outwards until the memory module pops
up. Then simply remove the module.
Due to the PCI v2.2 specifications, you MUST unplug the power connector to the
NOTE
motherboard before performing system hardware changes to avoid having your
motherboard boot-up automatically.
13
http://www.TYAN.com
Hide quick links:
Advertisement
Table of Contents
