Select An Array Size - Dot Hill Systems RAIDCore User Manual

Select An Array Size

NOTE: Use the Page Up and Page Down keys to increase or decrease the array size in large increments.
Use the up arrow or down arrow keys to increase or decrease the array size in small increments.
To select an array size, perform one of the following, as shown in the table below.
Table 25 Selecting An Array Size
To Create This Array Size... Do This...
≤
2.199 TB
>
2.199 TB
56 Chapter 5 BIOS Configuration Utility
Use the Page Up or Page Down keys to select a
size
or
use the up arrow or down arrow keys to select a size.
1. Press the Page Up or the up arrow key to
increase the array size.
2. When an array size of 2.1 TB is reached, a message
states that a size greater than the maximum is being
attempted, and whether the size of the array should
be limited. Press Esc to create an array larger than
2 TB.
3. Press Page Up or the up arrow until either the
desired size or the maximum available size is
reached.
4. Press Enter.
5. Select a caching level using the arrow keys. Press
Enter.
6. Press C to confirm the > 2 TB array size.
7. Continue with the procedure,
Process on page 57.
NOTE: The array is marked Ready for use.
The text at the top of the RAIDCore(tm)
Array Configuration window returns to a
description of the menu items.
Then This...
Press Enter.
Resume the Boot