Canon iP4700 SERIES On-Screen Manual page 316

Check: Place the CD-R Tray properly.
Place the CD-R Tray properly, then press the
Make sure that you are using the CD-R Tray supplied with the printer ("G" is on the upper
side).
For details on how to place the CD-R Tray, see
Error Number: 1002 Is Displayed
Check 1: Place the DVD/CD on the CD-R Tray properly.
Place the DVD/CD on the CD-R Tray properly, then press the
printer.
Make sure that you are using the CD-R Tray supplied with the printer ("G" is on the upper
side).
For details on how to place the CD-R Tray, see
Check 2: Unrecognizable DVD/CD may be placed.
Canon recommends that you use DVD/CDs specially processed to be printed on by an inkjet
printer.
Check 3: Is the DVD/CD on the CD-R Tray already printed?
If you place a DVD/CD on which has already been printed on the CD-R Tray, the CD-R Tray
may be ejected.
In this case, change the settings of the printer driver and try printing again.
Clear the Detects a printable disc in the CD-R tray check box in Custom Settings on
the Canon IJ Printer Utility dialog box, then click Send.
When printing is over, select the Detects a printable disc in the CD-R tray check box
and click Send.
Note
If the Detects a printable disc in the CD-R tray check box is cleared, printing may start
without the DVD/CD loaded. Selecting the check box prevents the CD-R Tray from getting
dirty.
Message: 1850 Is Displayed
Check: Open the Inner Cover, then place the CD-R Tray properly.
Open the Inner Cover, place the CD-R Tray properly, then press the
For details on how to place the CD-R Tray, see
RESUME/CANCEL button.
Attaching/Removing the CD-R Tray
RESUME/CANCEL
Attaching/Removing the CD-R Tray
RESUME/CANCEL
Attaching/Removing the CD-R Tray
.
button on the
.
button.
.
Page top