How To Navigate Menus On The Lcd; Using The Operation Panel - Canon MG6100 SERIES On-Screen Manual

>
Contents Overview of the Machine
C002

How to Navigate Menus on the LCD

You can use the machine to print photos on a memory card or USB flash drive, make copies, or scan
originals without a computer. You can also make good use of the various functions of the machine with
the menu screen and the settings screen on the LCD.
This section describes the basic operation to navigate menus on the HOME screen and to select setting
items necessary for printing.

Using the Operation Panel

Selecting Menus on the HOME Screen
Selecting a Menu or Setting Item
Other Operations
Using the Operation Panel
The buttons lit on the Operation panel depend on the screen being displayed. To aid operation, only
buttons available for the current screen light up.
To select a button, touch it lightly with your finger tip.
Important
Notes on using the Operation Panel
Do not place any object (especially metallic objects or objects containing moisture) on the Operation
Panel. Doing so may cause the machine to malfunction.
Precious metals, such as in rings and bracelets, may cause malfunction of the machine. When
using the Operation Panel, keep such metals at least 0.8 inches / 2 cm away from the Operation
Panel.
Note
The display of the buttons on the Operation Panel will turn off if the machine is not operated for
about 5 minutes. To restore the display, touch any button except the
turn on, and available buttons light. Performing a print operation from a PC, etc. will also restore the
display as it was before the LCD turned off.
Using the , , , or
(A) Touch the , , , or
Or
(B) Trace your finger along the Scroll Wheel to select items.
(C) Scroll Wheel
> How to Navigate Menus on the LCD
button (Scroll Wheel)
button to select items.
Advanced Guide Troubleshooting
ON button. This will let the LCD