Canon PIXMA MG8220 Network Installation Manual page 7

Connecting to the Wireless Network
The printer automatically searches for access points that support WPS (Wi-Fi Protected Setup)*.
*Unless you are absolutely sure your access point supports WPS and you are familiar with activating this on your access point, press the Stop
button on the printer's operation panel and click on Other Methods on the Setup Procedure Selection screen (screenshot shown below)*.
If the Push Button Method is not shown on the printer's operation panel(when no WPS access points have been detected), select Standard
setup on the printers operation panel, then click Other Methods on the Setup Procedure Selection screen
<< Previous
If you selected the Push Button Method, follow any
remaining instructions to complete setup.
instructions
If you selected Other Methods, please continue to the next
page for important information
Next >>
Skip ahead to
7