Retained Accessory; Power (Rap); Shifting Into Park - Cadillac 2013 ATS Owner's Manual

To Use the Engine Coolant
Heater
1. Turn off the engine.
2. Open the hood and unwrap the
electrical cord. The cord is
clipped to the diagonal brace on
the passenger side of the engine
compartment.
3. Plug it into a normal, grounded
110-volt AC outlet.
WARNING
Plugging the cord into an
ungrounded outlet could cause an
electrical shock. Also, the wrong
kind of extension cord could
overheat and cause a fire. You
could be seriously injured. Plug
the cord into a properly grounded
three-prong 110-volt AC outlet.
If the cord will not reach, use a
heavy-duty three-prong extension
cord rated for at least 15 amps.
4. Before starting the engine, be
sure to unplug and store the
cord as it was before to keep it
away from moving engine parts.
If you do not, it could be
damaged.
Contact your dealer for information
on how long to use the heater in
your particular area.

Retained Accessory

Power (RAP)

These accessories can be used
after the engine is turned off:
Audio system (up to 10 minutes
or driver door is opened).
Power windows, sunroof
(if equipped), and power outlets
(up to 10 minutes or any door is
opened).
Driving and Operating

Shifting Into Park

(Automatic Transmission)
Use this procedure to shift into
P (Park):
1. Hold the brake pedal down and
set the parking brake.
See
or
2. Move the shift lever into P (Park)
by holding in the button on the
shift lever and pushing the lever
all the way toward the front of
the vehicle.
3. Turn the ignition to LOCK/OFF.
4. Take the keyless access
transmitter with you.
9-21
.