Buick Encore Owner's Manual page 260

To replace one of these bulbs:
1. Push the left end of the lamp
assembly toward the right.
2. Turn the lamp assembly down to
remove it.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
6. Turn the lamp assembly into the
lamp assembly opening
engaging the clip side first.
7. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Back-Up Lamp
Front Parking Lamp
Front Turn
Signal Lamp
High-Beam
Headlamp
License Plate Lamp
Low-Beam
Headlamp
For replacement bulbs not listed
here, contact your dealer.
921
7444NA
7444NA
9005LL
W5W LL
H11 LL