Buick Verano User Manual page 82

Audio can be transferred between
the Bluetooth system and the cell
phone.
The cell phone must be paired and
connected with the Bluetooth
system before a call can be
transferred.
During a call with the audio in the
vehicle, press the Transfer Call
button on the screen or press and
hold the / button on the
steering wheel.
Use the audio transfer feature on
the cell phone. See your cell phone
manufacturer's user guide for more
information. Press the Transfer call
button on the screen or press and
hold the / button on the
steering wheel.
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Turn and press the outer ring of
the TUNE/MENU knob and
select Enter Number.
2. Enter the phone number,
or select Enter Number on the
screen and select digits, then
press OK.
To use voice recognition, press the
/ button on the steering wheel.
Use the commands below for the
various voice features. For
additional information, say Help
while in a voice recognition menu.
Calls can be made using the
following commands.
These commands can
be used interchangeably to dial a
phone number.
This command allows a
phone number to be dialed by
entering the digits one at a time.
This command dials the
last number used on the cell phone.
To call a number:
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Dial or Call.
3. Say the entire number without
pausing, followed by Dial.
Once connected, the person called
will be heard through the audio
speakers.