Brother Multi-protocol On-board Ethernet Multi-function Print Server Network User's Manual page 26
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for Multi-protocol On-board Ethernet Multi-function Print Server:
- Network user's manual (122 pages) ,
- Network user's manual (78 pages)
Table of Contents
Advertisement
c
Double-click the unconfigured device.
®
Windows
Note
• If the print server is set to its factory default settings (if you do not use a DHCP/BOOTP/RARP server), the
device will appear as Unconfigured in the BRAdmin Light utility screen.
• You can find the node name and MAC Address (Ethernet Address) by printing the Network Configuration
List.
See Printing the Network Configuration List on page 122.
d
Choose STATIC from Boot Method (BOOT Method). Enter the IP Address, Subnet Mask and
Gateway (if needed) of your print server.
®
Windows
e
Click OK.
f
With the correctly programmed IP address, you will see the Brother print server in the device list.
Configuring your machine for a network
®
Macintosh
®
Macintosh
2
16
Advertisement
Table of Contents
Troubleshooting
