Electrical Specifications; System Electronics; Mechanical Specifications; Flush-Mount Loudspeakers - Bose FreeSpace 6 Installer's Manual

Electrical specifications

System electronics

• Input sensitivity: 200mV (music input), 200 V (page input)
• Power output: 16W into 2 load
• Power requirements: 120V or 220-240V ~ 50/60Hz
• Maximum power consumption: 140W
• Remote volume control value: 10k , Audio taper
• Music input impedance, channel A: Balanced: 32k , Unbalanced: 11k
• Music input impedance, channel B: Unbalanced: 10k
• Page input impedance: Balanced: 9k , Unbalanced: 1k
• Page and line output impedance: 400
• Page gain: 0dB to 80dB adjustable
• Frequency range: 80Hz – 16kHz
• Noise (line in to loudspeaker outputs): 20Hz – 20kHz bandwidth; -50dBV at 20dB gain into a 2 load
• Noise (line in to line outputs): 20Hz – 20kHz bandwidth; -65dBV at 20dB gain into a 10k load
• Frequency response: 20Hz – 20kHz, 1dB, referenced to 1kHz at line outputs
®
• Opti-voice paging circuitry: voice band equalization for maximum speech intelligibility, AGC circuit for automatic
compensation of varying input levels, gradual return of music to original level after page

Mechanical specifications

System electronics
• Dimensions: 4 inch (H) x 7.5 inch (W) x 15 inch (D)
(10.16 cm x 19.05 cm x 38.10 cm)
• Weight: 11.3 lb (5.14 kg)

Flush-mount loudspeakers

• Dimensions: 10.42 inch (H) x 10.87 inch (W) x 6.5 inch (D)
(26.47 cm x 27.61 cm x 16.51 cm)
• Weight: 4.2 lb (1.9 kg) installed with mounting hardware
• Finish: Front baffle – Arctic white polymer
Rear enclosure – aluminum
Grille – vandal resistant, expandable metal mesh

Surface-mount loudspeakers

• Dimensions: 3.3 inch (H) x 7.6 inch (W) x 6.4 inch (D)
(8.38 cm x 19.30 cm x 16.33 cm)
• Weight: 2.5 lb (1.2 kg) installed with mounting hardware
• Finish: Front baffle – Arctic white or Pro grey polymer
Rear enclosure – Arctic white or Pro grey polymer
Grille – vandal resistant, expandable metal mesh
AM180090_02_V.pdf • May 7, 2002
Specifications
33