Presser Feet, Attachments, And Accessories - Bernina Presser Feet At-A-Glance Reference Manual

At-A-Glance Reference Guide
to BERNINA
All-purpose foot for straight
stitch, zigzag, and other
forward-feed stitches.
All-purpose foot that works
well for forward-feed and
multi-motion decorative
stitches.
OVERLOCK FOOT #2/2A
For use with overlock
stitches to overcast fabric
edges, attach ribbing, and
sew overlock seams.
BUTTONHOLE FOOT #3
For manual buttonholes,
the sole has two grooves
for the beads of the but-
tonhole to move freely.
BUTTONHOLE FOOT #3A
Works with computerized
models to make measured,
repeatable buttonholes
automatically. Also has slide
for manual measuring.
Alignment guides make
it easier to make manual
buttonholes of the same
length.
Page 2 of 8
®

Presser Feet, Attachments, and Accessories

ZIGZAG FOOT #0
REVERSE PATTERN
FOOT #1/1C/D
STANDARD
AUTOMATIC
BUTTONHOLE FOOT
with SLIDE #3B
BUTTONHOLE FOOT #3C
Essentially the same
as Foot #3, this foot is
designed to work with
models that have a maxi-
mum stitch width of 9mm.
ZIPPER FOOT #4/4D
Designed to stitch next
to zipper coils, this foot
requires the use of a far
right or far left needle
position.
BLIND HEM FOOT #5
Works with the Blindstitch
for sewing "blind" hems.
The foot design helps
to create a smooth,
un-puckered hem.
EMBROIDERY FOOT #6
Designed for heavy satin
stitching and appliqué, this
foot also has a hole for
sewing over narrow cord
and elastic thread.
TAILOR TACK FOOT #7
Designed to make tailor
tacks to transfer pattern
markings, it also does
decorative work such as
fagoting and fringing.
JEANS FOOT #8/8D
This hinged, straight stitch
foot concentrates needle
power for better penetration
when sewing through thick,
heavy, dense layers.
©2009 BERNINA of America, Inc.