Using Your Baumatic Fridge Freezer; Before Switching On; Switching On The Appliance And Setting The Thermostat - Baumatic QUATTRO.MR Instruction Manual

Using your Baumatic fridge freezer

Before switching on

o Make sure that it has been installed by a suitably qualified
person, as
installation instructions.
o After delivery, wait for eight hours before connecting the
appliance to your mains supply. This means that any refrigerant
gasses that may have been disturbed during the transportation
process are allowed to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.

Switching on the appliance and setting the thermostat

You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat dial is located in the upper
centre of the fridge section.
o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the fridge
freezer reaches a cool enough temperature.
o With dry hands, connect your appliance to your mains supply.
Set the thermostat control knob to position <7> for a 24 hour
period, before positioning it to the normal setting of <3>.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
per the information contained in Baumatic's
10