Text Size - Baby Lock Palette Instruction Manual

Arranging Embroidery Designs (Layout & Editing)
■

Text Size

1.
Click in the Text Size selector.
2.
Type the desired height and press the
Enter
key, or click the desired value.
→ The setting is applied to all text patterns
that you will create, until the setting is
changed.
→ If text patterns or characters in a text
pattern were selected, the setting is also
applied to the selected text.
c
"Entering text/Small text" on page 80.
Editing entered text
Text that has been entered can easily be edited.
1.
Select the text or small text.
a
Note:
You cannot edit more than one text pattern
at a time. If you select more than one text
pattern, this menu command is not available.
2.
Click Text, then Edit Letters.
3.
The selected text is displayed in the text field.
4.
Edit the text as needed.
5.
Click OK.
→ The edited text is displayed in the Design
Page.
c
"Entering text/Small text" on page 80.
Specifying text attributes
Various character attributes for text can be set in the
Text Attribute Setting dialog box.
The settings are applied to the text pattern each
time the settings are changed.
1.
Select the text or small text.
2.
Click Text, then Text Attribute Setting.
c
"Color" on page 95 and "Specifying
sewing attributes" on page 96.
3.
If necessary, change the text attributes.
b
Memo:
To return a parameter to its default setting,
click beside it.
Sets the spacing
Kerning between individual
characters.
Vertical
Moves the text vertically.
Offset
Rotate
Rotates the characters.
angle
0.0 mm
5.0 mm
(between "A"
and "b")
0.0 mm
2.0 mm
0 degree
20 degrees
83