Winding The Bobbin - Baby Lock A-Line Natalie BL18A Getting To Know Manual

1. Pull the handwheel out to the right.
2. Draw the thread from the spool. Guide the thread around the
bobbin winder thread guide.
3. Insert the thread through the hole in the bobbin from the inside to
the outside. Put the bobbin on the bobbin winder spindle.
4. Push the bobbin to the right.
5. With the free end of the thread held in your hand, lightly press the
foot control. Stop the machine when it has made a few turns, and
cut the thread close to the hole in the bobbin. This keeps it from
tangling in the bobbin case.
6. Press the foot control again until the bobbin is fully wound,
and then stop the machine. Return the bobbin winder spindle to its
original position by moving the bobbin winder spindle to the left,
and cut the thread.
7. Push the handwheel in to the left (original position).

Winding the Bobbin

1
1
2
3
5
6
7
4