Care And Maintenance; Cleaning The Machine Surface; Cleaning The Race - Baby Lock Tempo BLTP Instruction And Reference Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX

Care and Maintenance

Simple sewing machine maintenance operations are described below.
Cleaning the machine
surface
If the surface of the machine is dirty, lightly soak a
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning it
once with a wet cloth, wipe it again with a dry cloth.
CAUTION
●
Unplug the power cord before cleaning
the machine, otherwise injuries or an
electric shock may occur.
100

Cleaning the race

Sewing performance will suffer if dust collects in the
bobbin case; therefore, it should be cleaned
periodically.
Turn off the sewing machine.
1
2 Unplug the power cord from the power supply
jack on the right side of the sewing machine.
CAUTION
●
Unplug the power cord before cleaning
the machine, otherwise injuries or an
electric shock may occur.
3
Remove the flat bed attachment.
4 Grasp both sides of the needle plate cover,
and then slide it toward you.
1 Needle plate cover
The needle plate cover is removed.
5 Remove the bobbin case.
Grasp the bobbin case, and then pull it out.
1
1 Bobbin case
a