System Options; Security - Users; Security - Ip Address Filter; Date & Time Settings - Axis 213 PTZ User Manual

System Options

Security - users

User access control is enabled by default; the administrator sets the root password on first access. Other
users are authorized with user names and passwords, or the administrator can choose to allow anonymous
viewer login to the Live View page, described below:
User List
The user list displays the currently configured authorized users and their access levels:
• Viewer - the lowest level of access, which only allows the user access to the Live View page.
• Operator - an operator can view the Live View page, create and modify event types and adjust certain
other settings. The operator does not have access to the Systems Options configuration pages.
• Administrator - an administrator has unrestricted access to the Setup Tools and can determine the
registration of all other users.
User Settings
Check the required boxes to enable the following fucntions:
• Enable anonymous viewer login - allows any viewer direct access to the Live View page.
• Maximum number of simultaneous viewers - enter a value here to restrict the number of unicast
viewers accessing the unit. This is useful if you need to save on bandwidth. (Note that all multicast
viewers count as 1 viewer.)
• Enable anonymous PTZ control login - allows any viewer access to the Pan/Tilt/Zoom controls on
the Live View page.

Security - IP Address Filter

General
Enable IP Address Filtering - when enabled, the IP address filter allows or denies access to the AXIS 213
PTZ to the IP addresses in the list. The administrator can add up to 256 IP address ranges or single IP
addresses to the Allowed IP Addresses list.
See the IP address filtering help files
Referrals
To prevent unauthorized sources from including the video stream from the AXIS 213 PTZ into external web
pages, check the Referrals checkbox and enter the IP address or Host name of the allowed computer(s) that
host the web pages with the included video stream. Several IP addresses/host names can be defined and
should be separated by semicolons(;)
Date & Time Settings
Current Server Time
Displays the current date and time (24h clock). If this has not been configured, the time displayed is the
default setting. The time can be displayed in 12h clock format in the Overlay Images (see below).
New Server Time - Select your time zone from the drop-down list and check the daylight saving time
changes, if desired.
for information on how to add IP address ranges.
AXIS 213 PTZ
29