Operation - Desa JourneyMan HD-9250 Installation And Setup Manual

Journeyman series metal motion sensor light control
Table of Contents

Advertisement

Available languages

Available languages

Operation

Mode:
On-Time:
Test
5 Sec
Auto
1, 5, or 20 min.
Manual
Until Dawn*
* resets to Auto Mode at dawn.
RANGE BOOST
Turn Range Boost on for addi-
tional coverage only if needed.
Put the ON-TIME switch on the
sensor bottom in TEST and the
Range Boost switch to Off.
Put the ON-TIME switch in the
1, 5, or 20 minute position.
Works: Day Night
x
Off
Range Boost
TEST
ON TIME
TEST 1 5 20
AUTO
ON TIME
TEST 1 5 20
x
Manual Mode only works at
x
night because daylight returns
x
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
On
Manual Mode works with the
ON-TIME switch in the 1, 5,
or 20 minute position.
TEST
AUTO
MANUAL MODE
*
If you get confused while switching modes,
turn the power off for one minute, then back
on. After the calibration time, the control will
be in the AUTO mode.
-12-
MANUAL MODE
1 Second OFF
... back on.
Move ON-TIME Switch
to 1, 5, or 20 minutes
Flip light switch
off for one second
then back on*
then ...
598-1118-04

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents