Table of Contents
Advertisement
AT2020USB +
4
5
(on back)
1.
Capsule — Condenser microphone element with cardioid polar pattern
2.
Blue LED — Blue light shows microphone is receiving USB power
3.
Headphone Level Control — Dial controls headphone volume
Mix Control — Blends microphone and pre-recorded audio
4.
5.
Headphone Jack —
Metal Construction — Tough, durable, resilient design
6.
USB Connector — Use the included USB cable to connect AT2020USB + to your Mac or PC
7.
8.
USB Cable
Setting up your microphone with included pivot mount and tripod desk stand
Screw the pivot mount onto the top of the tripod desk stand.
A.
B.
Place the tripod desk stand on a flat surface. (The tripod legs will extend to provide a wide,
secure base.)
Install the AT2020USB + microphone into the threaded collar of the pivot mount and tighten
C.
collar while holding the microphone in place. The front of the microphone should be facing the
sound source. (A USB icon and blue LED indicate the front of the microphone; the product model
number is displayed on the rear of the microphone.)
D.
If necessary, adjust the microphone's angle with the pivot mount's thumbscrew.
Plug the provided USB cable into the USB digital output at the base of the microphone.
E.
Note: Many recording software programs are available online. Audacity is widely used free software
for recording and editing sounds. It is available online at http://audacity.sourceforge.net/
4
1
7
/
-inch (3.5 mm) stereo jack for connecting your headphones
1
8
2
3
6
8
Hide quick links:
Advertisement
Table of Contents
