Table of Contents
Advertisement
Before you proceed with the installation, it is necessary that you have enough information
about the Wireless PCMCIA Card. There are three sections for different OS. Section 2.1
describes how to install the card to Windows 98/ME and Windows 2000. Section 2.2 shows
how to install it to Windows XP and section 2.3 for Windows NT. Please refer to the related
section according to the OS your PC installed.
Note: If you ever install the other Wireless PCMCIA Card before, please uninstall the existed
driver and utility first. If this is the first time to install this device, please refer to the
following steps to complete the installation.
2.1 Windows 98/ME/2000 Installation
The following installation operates under Window 2000. Procedures, however, will be the
same for Window 98/ME.
Note: Do not insert the Wireless PCMCIA Card before completing below process.
STEP I : Driver and Software Installation
A.
Insert Drivers and User's manual CD to your CD drive (suppose D:\). Run "setup.exe"
under "D:\Utility\WL-3552\" directory, or click the "Start" button and choose "Run". In the
box appears, enter "D:\Utility\WL-3552\ setup.exe" (where "D" is the letter of your
CD-ROM drive). You will see the dialog box as the picture. It will copy some files for
installation
B.
When this screen appears, please press "Next" to continue.
Chapter 2 Installation Procedure
6
WL-3552 User's Manual
Advertisement
Table of Contents
