Table of Contents
Advertisement
using either the standard CAPI interface, or the NDISWAN Miniport adapter. Please
read the following steps for details of NDISWAN Miniport setup, Dial-Up Networking,
and RAS applications in Windows NT 4.0. The installation for Windows NT 3.51 is very
similar to NT 4.0. Please refer the following steps for Windows NT 3.51 also.
Installing and Configuring the Drivers
After you insert the ISDN card into the available slot and turn on your computer as
described before, your computer should boot into Windows NT. If your Windows NT has
installed the PNPISA before, when system boot up the Windows NT will detect an ISDN
card and request to install its device driver, please check " Do not install a driver" and
follow the instructions below to install the ISDN T/A 128 driver.
Click the Network Icon in the Control-Panel and Adapters tab. You will get the below
1.
window.
Click Add, then you get a window as below.
2.
Figure 3-14 NT Installation
30
Advertisement
Table of Contents
