Table of Contents
Advertisement
8. Select "Obtain an IP address automatically."
9. Select "Obtain a DNS address automatically."
10. Click OK.
4.3.3 DHCP client setup in WINDOWS NT4.0
You can configure your WINDOWS NT 4.0 to be a DHCP client during installation, or it can be set
manually after the system is already installed. The steps to manually set it up are listed below.
1. Click Start.
2. Select Settings, and then select Control Panel.
3. Click Network.
4. Click Protocol.
5. Select TCP/IP Protocol.
6. Select "Obtain an IP address from a DHCP Server" and click OK.
4.3.4 DHCP Client Setup on Mac OS
1. Click Apple Menu.
2. Select Control Panel, and then select TCP/IP.
3. Select "Connect via Ethernet" and "Configure: Using DHCP Server," and then close the
TCP/IP menu.
4. Click Save.
4.4 W
P
EB
UBLISHING
The ISA-4000 allows users to publish their web pages using FrontPage and FTP.
4.4.1 Publishing Web Pages with FrontPage 2000
The ISA-4000 includes the FrontPage 2000 Server Extensions, which permit the use of the client-
side FrontPage application to publish and edit web pages on the ISA-4000.
Before you use FrontPage to publish and edit your web pages, you should enable FrontPage Server
Extensions on the ISA-4000 as follows:
1. Log in to the ISA-4000 as the administrator (refer to 5.1 Logging in as an Administrator).
2. Click Control Panel.
3. In the Administration menu, click Network Services, and then click Web Services:
« 18 »
Advertisement
Table of Contents
