Playing Dvd Video Discs; Watching A Dvd Video; Basic Operation Of Dvd Video; Specifying Title - Pioneer DVH-P4050MP Operation Manual

Section
03 Operating this unit

Playing DVD video discs

Watching a DVD video

Read the precautions for discs and player on
Handling guideline of discs and player on page
57.
1 Title number indicator
Shows the title currently playing.
2 Chapter number indicator
Shows the chapter currently playing.
3 Play time indicator
Shows the elapsed playing time of the current
chapter.
4 DVD-VR indicator

Basic operation of DVD video

1 Use the thumb pad to select the desired
menu option.
When the DVD offers a menu, a menu is dis-
played.
# This function is available for DVD video.
2 Click the thumb pad.
Playback starts from the selected menu item.
# You can display the menu by pressing the
MENU or TOP MENU while a disc is playing.
Pressing either of these buttons again lets you
start playback from the location selected from the
menu. For details, refer to the instructions pro-
vided with the disc.
# The way to display the menu differs depending
on the disc.
3 To perform fast forward or reverse,
press and hold m or n.
# If you continue pressing m or n for five
seconds, the icon m or n is highlighted.
When this happens, fast reverse/fast forward con-
18
En
tinues even if you release m or n. To resume
playback at a desired point, press f.
# Fast forward/fast reverse may not be possible
at certain locations on some discs. If this hap-
pens, normal playback automatically resumes.
# There is no sound on fast forward or reverse.
4 To skip back or forward to another
chapter, press o or p.
Pressing p skips to the start of the next
chapter. Pressing o once skips to the start
of the current chapter. Pressing again will skip
to the previous chapter.
Chapter numbers are displayed for eight sec-
onds.
5 To stop playback, press g.
# When you stop DVD playback by pressing g,
that location on the disc is memorized enabling
playback from that point when you play the disc
again.
# To resume playback, press f.
# If the remote control is set to DVH, g does
not operate.

Specifying title

To perform this function, set the remote con-
trol to DVD mode.
! You cannot operate this function by using
NUMBER when the remote control is set to
DVH mode.
% Press 0 to 10 corresponding to a desired
title number.
Title number is displayed for eight seconds
and playback starts from the selected title.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.