When Connecting With A Rear View Camera - Pioneer AVH-P6850DVD Installation Manual

Connecting the Units

When connecting with a rear view camera

When using this product with a rear view camera, automatic switching to video from a
rear view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a
tight parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
This product
20 cm
10 cm
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
Note:
• It is necessary to set AV INPUT2 to B.CAMERA in SETUP
when connecting the rear view camera.
7
ENG/MASTER 96 INST
Back up camera input
(VIDEO 2/BACK UP CAMERA INPUT)
RCA cable
(sold separately)
8 m
1. Clamp the lead.
CAUTION
You must use a camera
which outputs mirror
reversed images.
rear view camera
To video output
Extension lead (supplied)
Fuse resistor
2. Clamp firmly with
needle-nosed
pliers.
<CRD4072-A> 8
Fig. 4