Configuring Clocking Synchronization; Chassis Menu > Chassis Clocking Sync; Modify System Clocking - Patton electronics ForeSight 6300 NMS Getting Started Manual

Network management system

Hide thumbs Also See for ForeSight 6300 NMS:

Quick start manual (8 pages)

Administrator's reference manual (156 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

Table of Contents

FS6300 NMS Getting Started Guide

Conﬁguring Clocking Synchronization

To conﬁgure clocking synchronization for a chassis:

1. From the menu tree on the left side of the screen, select Node (under Geographical Area).

2. In the main window, right-click on the chassis that you want to conﬁgure clocking for.

3. Select Chassis Clocking Synchronization from the pull-down menu.

The Chassis Clocking Synchronization window displays.

4. Select Modify System Clocking from the menu tree on the left side of the screen.

5. Select a card from the Select Card drop-down menu, and select a clock from the Clock Reference drop-

down menu. The Clock Reference can be Master(1), Secondary(2), or Slave(3). Click Submit.

6. Repeat Step 5 for each card in the chassis.

Note

A chassis can have only one master and one secondary, so if you accidentally

select another master in the same chassis, the NMS will not allow you to save

the clock for that card as the Master.