Panasonic HNP11 Operating Instructions Manual page 87

Other Errors
Problem
Recording cannot be started
because "XXXX" has reached its
recording capacity. Delete
unnecessary images in order to
start recording.
"XXXX" =
• Camera Name
Recording cannot be started
because "XXXX" has disabled the
camera. Enable the camera in
order to start recording.
"XXXX" =
• Camera Name
Software Startup failed.
Restart this software.
If situation does not improve after
restarting the software, restart
your PC.
An internal communication error
has occurred. Restart this
software.
If situation does not improve after
restarting the software, restart
your PC.
If camera is disabled, the
connection is broken and the timer
and recording functions are also
disabled.
Is it OK to disable all the selected
camera?
Connection to the camera cannot
be confirmed.
The Address, Port Number or
Proxy settings may be incorrect.
Are you sure you want to save?
Cause and Remedy
• The capacity has reached the recording
capacity limit.
Delete unnecessary images, or change
the settings of recording capacity limit.
• The camera is disabled. (The disabled camera
cannot be recorded.)
Follow the instruction message.
• This software fails to start the ncrcore.exe file.
Restart your PC.
• The ncrcore.exe file is not started, or this
software cannot open the ncrcore.exe file.
Restart your PC.
• The camera is disabled.
Follow the instruction message.
• The camera cannot be accessed.
Follow the instruction message.
Operating Instructions
87