Pause Insertion, Automatic - Panasonic KX-TD612E Features Manual

1.1 General Features

Pause Insertion, Automatic

Description
To access the Integrated Services Digital Network (ISDN), sending out DTMF signals may be
needed. To send out the dialled number in DTMF, you must insert a PAUSE. Any digits
following the PAUSE will be sent as DTMF. This feature works for system stored numbers
such as System Speed Dialling and One-Touch Dialling (Refer to 2.2.2 Easy Dialling and 2.2.3
Redial in User Manual) and Least Cost Routing (LCR).
Conditions
• This feature does not work when manually dialling.
• To use this feature, you have to assign [990] System Additional Information, Area 07 — Bit
1 as Selection 0 : enable (Default : disable), otherwise dialled numbers later than PAUSE
entry cannot be sent.
Programming Guide References
• [001] System Speed Dialling and Intelligent Call Handling Number Set
• [412] Pause Time
• [990] System Additional Information
Features Guide References
• Least Cost Routing (LCR)
User Manual References
• 2.2.2 Easy Dialling
• 2.2.3 Redial
208 Features Guide