Setting Location; Saving The Settings - Vixen SPHINX SXD Instruction Manual

Page 17

Setting Location

Enter the longitude, latitude, and time zone of your observing site. Once the settings for
your location are entered and saved, you don't need to change them unless you travel more
than 15 miles to a different observing location. The longitude and latitude of your
observing site can be checked on a map or with a GPS device. The initial location is set at
Tokyo.
Choose Location with the keys and press Select to enter.
To change the longitude and latitude settings for your observing site, move the cursor with
the keys to the item where corrections are needed. Then change the numbers with
the keys.
To finish the setting, move the cursor to OK with the keys and press Select. The
screen will go to the initial setting screen.

Saving the Settings

Save your time, language and contrast settings for the next use. Failure to do so will
result in having to re-enter these settings every time you turn on the power. Once you
save the settings, they will be stored in the memory of the STAR BOOK and you can simply
choose OK to advance the screen the next time you use it.
Choose Save Setting with the keys and press Select to enter.
Next the confirmation screen is displayed. Move the cursor to OK with the keys and
press Select to enter.
Now all the entered data is saved and the screen goes back to the initial setting screen.