Table of Contents
Advertisement
Using a Password
If the unit does not reset after
pressing the reset button, remove
the battery, wait at least two min-
utes, and then re-install it.
To Set a Password
1. Press
.
2. Press
to highlight Set
Password and press EINGABE.
3. Type a password and then press
EINGABE.
Your password can have up to 8
letters. You are prompted to
retype your password.
4. Type your password again
exactly as you did the first time.
5. Press EINGABE to confirm and
enable your password.
To disable the password, repeat
Steps 1 and 2 above, and press
EINGABE when Enter New
Password is displayed.
Using the Calculator
To Make a Calculation
1. Press
culator screen.
2. Type a number.
Note: Q-P will type numbers 0-9
automatically.
You can type up to 10 digits.
To type a decimal, press G(.).
To change the sign of a number,
press Y(+/-).
3. Press H(+), J(-), K(X), L(÷) to add,
subtract, multiply, or divide.
4. Type another number.
5. Press EINGABE.
To repeat the calculation, press
EINGABE again.
6. Press CLEAR to clear the cur-
rent calculations.
61
until you see the cal-
Advertisement
Table of Contents
