Trip Computer - Volvo V50 Owner's Manual

Left-hand stalk switch
Direction indicators, light switch
and main beam flash
Resistance point position (1)
When changing lanes or overtaking, move
the lever until you feel a distinct resistance.
The lever returns when released. This action
results in three flashes.
Normal turns (2)
The direction indicators light when you move
the lever in the direction the steering wheel
moves during a turn. When the steering
wheel returns to centre after a turn, the
direction indicators switch off automatically.
Main beam flash (3)
Pull the lever towards you (until you feel a
slight resistance). The main beam remains lit
until you release the lever.
Switching between main and dipped
beam (3)
Pull the lever towards you past the "flash
position" and release it to change between
main and dipped beam.
Home safe lighting (3)
When leaving the car in the dark or in a dimly
lit area:
– Remove the key from the ignition switch.
– Pull the stalk switch towards you.
– Exit the car.
– Lock the doors.
The dipped-beam lighting, position/parking
lights, number plate lighting and door mirror
lamps (option) will come on. These lamps will
remain lit for 30, 60 or 90 seconds. You can
adjust the delay from the car settings menu
on the centre console display. See page 64.
Instruments and controls

Trip computer

Controls
To scroll through trip computer information,
turn the thumbwheel (B) in steps, either
upward or downward. Continue turning to
return to the starting point.
NOTE! If a warning message interrupts while
you are using the trip computer, this message
must be acknowledged. Acknowledge by
pressing the READ button (A) and revert to
the trip computer function.
Functions
The trip computer displays the following
information:
• AVERAGE SPEED
47