Equalizer; Sound Stage*; Optimum Sound Reproduction; Resetting The Audio Functions - Volvo XC60 Owner's Manual

04 Comfort and driving pleasure
Audio system
04
Subwoofer location.
•
Surround
* – Surround settings.
Under Surround 3 channel stereo or Dolby
Surround Pro Logic II can be activated by
selecting 3-channel or
This enables the following options:
•
Centre level * – Level for centre speaker.
•
Surround level * – Level for surround.

Equalizer*

The equalizer can be used to adjust different
frequency bands separately.
1. Go to Audio settings
Equalizer front or Equalizer rear
The sound level for the wavelength is
adjusted with /
*
136
Option/accessory, for more information, see Introduction.
button. Press
wavelength.
2. Use ENTER to save or EXIT to close.

Sound stage*

The sound experience can be optimised for the
driver's seat, both front seats or the rear seat.
Select one of the options under
Audio settings

Optimum sound reproduction

The audio system is calibrated for optimum
sound reproduction by means of digital signal
processing.
This calibration takes into account loudspeak-
ers, amplifiers, passenger compartment
acoustics, listener position etc. for each com-
DPLII respectively.
bination of car model and audio system.
There is a also a dynamic calibration that takes
into account the position of the volume control,
radio reception and vehicle speed.
The controls explained in these operating
instructions, e.g.
Equalizer
able to adapt the sound reproduction accord-
and select
. ing to personal taste.
on the navigation
/ to select another
Sound stage.
Bass , Treble and
, are only intended for the user to be
External audio source audio volume
The AUX input can be used for connecting an
MP3 player which has no USB connection for
example, see page 133.
NOTE
The audio quality may be impaired if the
player is charged while the audio system is
in AUX mode. In which case, avoid charging
the player via the 12 V socket.
The audio source connected to the AUX input
may have a different volume to the internal
audio sources. Correct this by adjusting the
input volume of the AUX input:
1. Set the audio system in AUX mode using
MODE and navigate with
volume .
2. Turn the control
or press
navigation button.

Resetting the audio functions

All audio settings can be reset to the original
factory settings.
The reset is carried out in FM mode under
Audio settings Advanced audio sett.
Reset all.
to AUX input
/ the