08 Maintenance and service
Lamps
Lighting, cargo area
1. Insert a screwdriver and gently prize so
that the lamp housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press
back the lamp housing.
08
340
Vanity mirror lighting
Removing the mirror glass
1. Insert a screwdriver underneath the lower
edge, in the centre. Carefully prize up the
lug on the edge.
2. Insert the screwdriver underneath the edge
on the left and right-hand sides (by the
black rubber sections), and prize carefully
so that the mirror glass comes loose in the
lower edge.
3. Carefully detach and lift aside the entire
mirror glass and cover.
4. Replace the bulb.
Securing the mirror glass
1. Press the three lugs at top edge of the mir-
ror glass back into position.
2. Then press the three lower lugs back into
position.
Specification, bulbs
A
Lighting
W
Dipped beam,
55
halogen
Main beam, Hal-
65
ogen
Extra main beam,
55
ABL
Front direction
21
H21W LL
indicators
Position/parking
5
lamps front
Side marker
5
lamps front
Front fog lamps
35
Direction indica-
5
WY5W LL
tors side, door
mirrors
Glovebox light-
5
Socket SV8.5
ing
Length 43 mm
Type
H7 LL
H9
H7 LL
W5W LL
W5W LL
H8