HELP TOPICS
How do I return to the
Setup App?
There is a picture, but
there is no sound.
The TV displays
"No Signal."
There are black/gray
bars on the top/bottom/
sides of the screen.
There is no power.
The V.I.A. App is
not working.
•
The on-screen menu has guided setup. Press MENU, then select HELP > Guided Setup. Select the
type of setup you need and press OK. The Setup App will begin.
•
To reset the TV to factory defaults, press MENU > HELP > Reset TV Settings. Select Yes. Remember
that all of your settings will be lost!
•
Press the VOLUME UP button on the remote or on the side of the TV.
•
Press the MUTE button on the remote to ensure that mute is off.
•
Press MENU, then select TV Settings > Audio. Be sure TV Speakers is set to ON.
•
Be sure your connected devices are turned on.
•
Press the INPUT button on the remote and select the input to which your device is connected
(HDMI-1, Composite, Component, etc).
•
Note that some television channels add black bars to the picture.
•
Set the TV to Wide or Zoom mode. Press MENU, then select Wide. Highlight Wide or Zoom and
press OK.
•
Adjust the video settings of your external device
•
Be sure the power cord is securely connected to the AC socket on the TV and to a working
electrical outlet.
•
Press the POWER button on the remote or on the side of the TV.
•
If the above steps do not work, try plugging the power cord into a different outlet.
•
Be sure your TV is connected to an Internet connection.
•
Restart the App by pressing the EXIT button to close the App, then open the App.
•
Reboot your TV by pressing the POWER button on the remote, then turn it back on.