Adjusting Procedures; Front Panel; Rear Panel; Routine Maintenance - Fostex X-24 Service Manual

X-24
< Front Panel >
2 ( HOT )
1 ( GND )
< Rear Panel >
1. Line out jacks [ LINE OUT L, R ]
2. Line in/insert jacks [ LINE/INSERT 1, 2, 3, 4 ]
3. Tape out jacks [ TAPE OUT 1, 2, 3, 4 ]

3. ADJUSTING PROCEDURES

3-1. Routine Maintenance

3-1-1. Cleaning
1) Head
With constant use, the head surface becomes soiled with magnetic particles from the tape, dirt and dust. Under such
conditions, the tape will not always be in smooth contact with the head and thus result in poor performance. Less
8
3 ( COLD )
PUNCH
PHONES IN/OUT
1. Mic input jacks [ MIC IN 1/3, 2/4 ]
2. Headphone jack [ PHONES ]
3. Punch in/out jack [ PUNCH IN/OUT ]
TAPE OUT
4 3 2 1
4. Dolby B noise reduction on/off switch
[ DOLBY NR ON/OFF ]
5. Power switch [ ON-STANDBY ]
6. DC IN connector [ DC IN 12V ]