Telephone Button Programming
200 Series Programs
200 Series Programs
Table 1-14
Programs 200~202
Button
Sequence
200
Station Data
200
Hold
,
200-00
Primary DN
Hold
n,
200-01
PDN Equipment
Number
FB01
, xxyyzz,
200-02
Station Type
FB02
Hold
, n,
200-03
Circuit Type
FB03
Hold
, n,
200-04
Station COS
•
Day1 COS
•
Day2 COS
•
Night COS
FB04
Spkr
, n,
Spkr
Hold
, n,
200-05
Station DRL
•
Day1 DRL
•
Day2 DRL
•
Night DRL
FB05
Spkr
, n,
Spkr
Hold
, n,
200-06
Station FRL
•
Day1 FRL
•
Day2 FRL
•
Night FRL
FB06
Spkr
, n,
Spkr
Hold
, n,
200-07
LCR Group
FB07
Hold
, n,
1-28
Value(s)
n =
Up to 5 digits
xx =
Cabinet 1 (CTX100),
01~02 (CTX670 Basic),
01~07 (CTX670 Exp.)
Hold
yy =
Slot (01~10)
zz =
Circuit (01~16)
n =
1. DKT
2. SLT
n =
1. Extension
2. Voice Mail
3. Announce (Not used in
USA or Canada)
n =
1~32
, n,
n =
1~16
, n,
n =
1~16
, n,
n =
1~16
Summary
This command assigns stations to the system.
Primary DN (enter an existing PDN or enter a PDN you wish to create
for a new station).
Enter the PDN equipment number (xxyyzz). This is the cabinet, slot,
and circuit number of the ADKU, BDKU/BDKS, PDKU, or RSTU
interface PCB to which the the PDN is, or should be assigned.
Example: If the PDN should be a assigned to a BDKU in cabinet 5,
slot 2, circuit 3; enter 050203.
Cabinet numbers:
•
CTX100: Select 01 for Base and Expansion cabinet.
•
CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
•
CTX100: Select 01~04 for Base slots and 05~08 for Expansion
slots.
•
CTX670: Select 01~08 for Base slots and 01~10 for Expansion
slots.
Station Type.
Note
Select SLT to set up voice mail.
Extension: Should be assigned to PDNs the are associated with
Digital or Standard telephones
Voice Mail: Should be assigned to PDNs associated with Voice Mail
RSTU circuits.
COS for Day1.
COS for Day2.
COS for Night.
DRL for Day1 (Used for Credit card calling).
DRL for Day2.
DRL for Night.
FRL for Day1.
FRL for Day2.
FRL for Night.
Station LCR Group Number.
Strata CIX/CTX Telephone Button Programming 11/04