Speed Cameras; About Speed Cameras; Speed Camera Warnings; Changing The Way You Are Warned - TomTom Blue&Me- 2 LIVE Reference Manual

Speed cameras

About Speed Cameras

The Speed Cameras service warns you about the following roadside camera locations:
Speed camera locations.

Accident blackspot locations.

Mobile speed camera locations.

Average speed camera locations.

Toll road camera locations.

Traffic light camera locations.


Speed camera warnings

By default, warnings are given 15 seconds before you reach a speed camera location. To change
the number of seconds or warning sound, tap Alert settings in the Speed Cameras menu.
You are warned in three ways:
Your device plays a warning sound.

The type of speed camera and your distance from the camera location is shown in the Driving

View. If a speed restriction has been reported for the camera, the speed is also shown in the
Driving View.
The location of the speed camera is shown on the map.

Note: For average speed cameras, you are warned by a combination of icons and sounds at the
start, middle and end of the average speed check zone.

Changing the way you are warned

Alert settings
To change the way your Blue&Me-TomTom 2 warns you about speed
cameras, tap the Alert settings button.
You can then set how close you want to be to a speed camera before
you are warned and what type of sound will be played.
For example, to change the sound that is played when you approach a
fixed speed camera, do the following:
1. Tap Services in the Main Menu.
2. Tap Speed Cameras.
3. Tap Alert settings.
A list of speed camera types is displayed. A speaker is shown next to
the speed camera types that have been set for an alert.
4. Tap Fixed cameras.
5. Tap NO to avoid removing the fixed speed camera alerts.
6. Enter the time in seconds for when a warning is given before you
reach a camera. Then tap OK.
89