Ejecting A Cd; Shutting Down - Tascam Digital Portastudio DP-24 Owner's Manual

Ejecting a CD

1. When Recorder mode is
press the CD button to open the
CAUTION
The disc tray will not open when the Home screen or
screen is shown. Open the disc tray when the
MENU
menu screen or
CD PLAYER
2. Press the F3 (-) button or the disc tray eject
button on the front panel to open the tray slightly,
and then pull the tray out until it opens completely.
Hold the disc by its edges and lift it out.
CAUTION
Do not lift the disc forcibly. Doing so could damage the
unit or the disc.
mode,
Multi Track
menu screen.
CD
CD
screen is shown.
2 - Quick Guide

Shutting down

Turn the unit off when you are done using it.
1. Press the HOME button to open the Home screen.
2. Press and hold the STANDBY/ON button on the rear
panel until
PORTASTUDIO
When the unit completes its automatic shutdown
procedure, which includes recording various
information about the operations that have been
performed until now, the power turns off (standby).
Always use the procedure above to turn the power off
properly.
CAUTION
When the power is on, do not cut the power to the unit
by, for example disconnecting the power cord. All settings
made since the last time you saved will not be saved. If
you cut the power while an SD card is being accessed, all
recorded songs and data may be damaged and cannot be
recovered.
appears on the display.
23
TASCAM DP-24