Advertisement
GENERAL SAFETY RULES
Meaning of symbols marked on the product
Read the user manual before using the machine
Whenever the machine is in use, safety goggles
must be worn to safeguard against flaying object, as
must ear protectors, such as a soundproof helmet, in
order to protect the operator's hearing. If the operator
is working in an area where there is a risk of falling
objects, a safety helmet must also be worn.
Keep people or animals at least 45m away from
the machine during operation
Wear gloves to protect your hands
Wear safety boots to protect against electric shock
WARNING! When using petrol tools, basic safety precautions, including the following, should always be followed to
reduce the risk of serious personal injury and/or damage to the unit.
Read all these instructions before operating this product and save these instructions.
WHAT TO DO
READ YOUR USER MANUAL AND ALL SUPPLEMENTS
(IF
ANY
ENCLOSED)
THOROUGHLY
BEFORE
OPERATING YOUR UNIT.
WARNING: Keep children, bystanders,
and animals 50 feet (15 meters) away. If
approached stop unit immediately.
1.
Wear close fitting, tough work clothing that will
provide protection, such as long slacks or trousers,
safety work shoes, heavy duty work gloves, hard
hat, a safety face shield, or safety glasses for eye
protection and a good grade of ear plugs or other
sound barriers for hearing protection.
2.
Prepare in a safe place. Open fuel cap slowly to release
any pressure which may have formed in fuel tank. To
prevent a fire hazard, move at least 10 feet (3 meters)
from fueling area before starting.
3.
Turn unit off before setting it down.
4.
Always hold unit firmly with both hands, the thumb
and fingers encircling the handles.
5.
Keep all screws and fasteners tight. Never operate
your equipment when it is improperly adjusted or not
completely and securely assembled.
6.
Keep handles dry, clean and free of fuel mixture.
7.
Keep linehead as close to ground as practical. Avoid
hitting small objects with linehead. When cutting on a
slope, stand below linehead. NEVER cut or trim on
a hill or slope, etc. if there is the slightest chance of
slipping, sliding or losing firm footing.
8.
Check area you will be trimming for debris that may
be struck or thrown during operation.
9.
Keep all parts of your body and clothing away from
linehead when starting or running engine. Before
starting engine, make sure linehead will not come in
contact with any obstacle.
10. Stop engine before examining cutting line.
Warning! Danger
Warning! Hot surface
Danger : Objects thrown up by machine
Acoustic power level LWA accordance with
directive 2000/14/EC
Maximum revolution frequency of the drive shaft with
line head
Maximum revolution frequency of the drive shaft with
blade
11. Store equipment away from possible ignition sources,
such as gas-powered water heaters, clothes dryers,
or oil-fired furnaces, portable heaters, etc.
12. Always keep the debris shield, linehead, and engine
free of debris build-up.
13. Operation of equipment should always be restricted
to mature and properly instructed individuals.
BRUSH / GRASS BLADE SAFETY
PRECAUTIONS
1.
FOLLOW ALL WARNINGS and instructions regarding
operation and blade installation.
2.
BLADE CAN VIOLENTLY THRUST AWAY FROM
MATERIAL IT CANNOT CUT - Blade thrust can cause
amputation of arms or legs. Keep people and animals
50 feet (15 meters) away in all directions. If blade
contacts foreign objects during operation, turn off
engine and allow coasting blade to stop. Then check
blade for damage. Always discard blade if it is warped
or cracked.
3.
BLADE THROWS OBJECTS VIOLENTLY - You
can be blinded or injured. Wear eye, face, and leg
protection. Always clear work area of any foreign
objects before using blade. Keep people and animals
15 meters away in all directions.
4.
INSPECT YOUR TRIMMER AND ATTACHMENTS
BEFORE EACH USE - Never use unless all blade-
attaching hardware is properly installed.
5.
BLADE COASTS AFTER THROTTLE IS RELEASED
- A coasting blade can cut you or bystanders. Before
performing any service on the blade, always turn off
engine, and be sure coasting blade has stopped.
6.
50-FOOT (15 meters) DIAMETER HAZARD ZONE
-Bystanders can be blinded or injured. Keep people
and animals 15 meters away in all directions.
4
AU
1. DO NOT USE ANY OTHER FUEL than that recom-
mended in your manual. Always follow instructions in
the Fuel and Lubrication section of this manual. Never
use gasoline unless it is properly mixed with 2-cycle
engine lubricant. Permanent damage to engine will
result, voiding manufacturer's warranty.
2. DO NOT SMOKE while refueling or operating equip-
ment.
3. DO NOT OPERATE UNIT WITHOUT A MUFFLER
and properly installed muffler shield.
4. DO NOT TOUCH or let your hands or body come in
contact with a hot muffler or spark plug wire.
5. DO NOT OPERATE UNIT IN AWKWARD POSITIONS,
off balance, outstretched arms, or one-handed. Always
use two hands when operating unit with thumbs and
fingers encircling the handles.
6. DO NOT RAISE LINEHEAD above ground level while
unit is operating. Injury to operator could result.
7. DO NOT USE UNIT FOR ANY PURPOSES OTHER
than trimming lawn or garden areas.
8. DO NOT OPERATE UNIT FOR PROLONGED
PERIODS. Rest periodically.
Model No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AT33594
Engine Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air-cooled, 2-Cycle,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chrome Cylinder
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28cc
Dry Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 kg
Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700 ml
Bump Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Twin Line Bump Feed
Blade (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drive Shaft Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66cm+66cm
Cutting Width (Twin Line Head) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43cm
(Blade Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23cm
Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "J" Handle
Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electronic
Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Centrifugal Clutch
Sound pressure level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 dB(A)
Sound power level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110.3 dB(A)
Guarantee sound power level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 dB(A)
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.8 m/s 2
Maximum Engine Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.75 kW
Maximum rotational frequency of the spindle (Bump Feed Head) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8500 r.p.m
Maximum rotational frequency of the spindle (Blade). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11000 r.p.m
Idle speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,700-3,000min -1
Fuel consumpion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.45 Litres/hr
Starting Mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Super Start Spring Assisted
WHAT NOT TO DO
9. DO NOT OPERATE UNIT WHILE UNDER THE
INFLUENCE OF ALCOHOL OR DRUGS.
10. DO NOT OPERATE UNIT UNLESS DEBRIS SHIELD
AND/OR GUARD IS INSTALLED AND IN GOOD
CONDITION.
11. DO NOT ADD, REMOVE OR ALTER ANY
COMPONENTS OF THIS PRODUCT. Doing so
could cause personal injury and/or damage the unit
voiding the manufacturer's warranty.
12. DO NOT operate your unit near or around flamma-
ble liquids or gases whether in or out of doors. An
explosion and/or fire may result.
13. DO NOT USE ANY OTHER CUTTING ATTACHMENT.
Use only Talon replacement parts and accessories,
which are designed specifically to enhance the per-
formance and maximize the safe operation of our
products. Failure to do so may cause poor perform-
ance and possible injury. Use only the stringhead
supplied with this product. Do not use any other cut-
ting attachment. Use of such attachments will void
your factory warranty and could result in serious
bodily injury.
SPECIFICATIONS
4 Teeth
5
AU
Advertisement
