Advertisement
SAFETY WARNINGS FOR ELECTRIC
CULTIVATORS
1. WARNING: To reduce the risk of electrical shock, use
only extension cords approved for outdoor use.
2. CORDS SETS: Make sure your cord set is in good
condition. When using a cord set, be sure to use a cord
that is heavy enough to carry the current that your unit
will draw. An undersized cord set will cause a drop in
line voltage resulting in loss of power and overheating.
See the operator's manual for the unit that will power
this attachment for the recommended cord size.
3. Inspect all extension cords and the unit power connec-
tion periodically. Look closely for deterioration, cuts or
cracks in the insulation. Also inspect the connections
for damage. Replace the cords if any defects or dam-
age appear.
4.
Do not use the unit in the rain.
5.
Do not handle the plug or unit with wet hands or
standing on any wet surfaces.
6.
Do not leave the unit plugged in when not in use,
changing attachments or while being serviced.
WHILE OPERATING
1.
Keep children and pets away.
2.
Wear safety glasses or goggles and ear/hearing pro-
tection when operating this unit. Wear a face or dust
mask if the operation is dusty.
3.
Wear heavy, long pants, boots and gloves. Do not
wear loose clothing, jewellery, short pants, sandals or
go barefoot. Secure hair above shoulder level.
4.
Use the unit only in daylight or good artificial light.
5.
Use the right tool. Only use this tool for the purpose
intended.
6.
Do not force unit. It will do the job better and with less
likelihood of injury at a rate for which it was designed.
7.
Use extreme caution when reversing or pulling the
unit towards you.
8.
Do not overreach, take extra care when working on
steep slopes or inclines. Always keep proper footing
and balance.
9.
Always hold the unit with both hands when operating.
Keep a firm grip on both the front and rear handle or
grips.
10. Keep hands, face, and feet at a distance from all mov-
ing parts. Do not touch or try to stop the tines when
they are rotating. Do not operate without guards in
place.
11. Do not operate the engine faster than the speed
needed to do the job. Do not run the engine at high
speed when not in use.
12. Always stop the engine/motor when operation is
delayed or when walking from one location the anoth-
er.
13. Stop the engine/motor for maintenance, repair, to
install or remove the tines. The unit must be stopped
and the tines no longer turning to avoid injury.
14. The tines become very sharp from use. Always wear
heavy gloves when handling, removing, installing or
cleaning the tines.
15. If you strike or become entangled with a foreign
object, stop the engine/motor immediately and check
for damage. Have damage repaired before attempting
further operations.
16. Stop the unit IMMEDIATELY if you feel excessive
vibration. Vibration is a sign of trouble. Inspect thor-
oughly for loose nuts, bolts or damage before contin-
uing. Repair or replace affected parts as necessary.
17. Stop and switch the unit to off for maintenance,
repair, or for changing attachment or other attach-
ments.
18. Keep unit clean of vegetation and other materials
which may become lodged between the tines and
gearbox or guard.
19. Use only genuine Talon replacement parts and
accessories for this unit. These are available from
you authorized service dealer. Use of any non Talon
parts or accessories could lead to serious injury to
the user, or damage to the unit, and void your war-
ranty.
OTHER SAFETY RULES
1. Do not operate this unit when tired, ill, or under the
influence of alcohol, drugs, or medication.
2. All guards and safety attachments must be installed
properly before operating the unit.
3. Inspect the unit before use. Ensure the tines are
installed correctly and secure.
4. Clear the area to be cultivated before each use.
Remove all objects such as rocks, broken glass, nails,
wire, or string which can be thrown or become entan-
gled in the cultivator attachment.
5. Keep the area of operation clear of all persons, partic
ularly small persons, and pets.
6. Allow the unit to cool before storing or transporting. Be
sure to secure the unit while transporting.
7. Store the unit in a locked up or high and dry place to
prevent unauthorized use or damage, out of the reach
of children.
8. Clean the tines with a a strong brush or clamp cloth.
Wipe the tines with a light machine oil to prevent rust.
9. Never douse or squirt the unit with water or any other
liquid. Keep handles dry, clean and free from debris.
Clean after each use, see cleaning and storage
instructions.
10. Keep these instructions. Refer to them often and use
them to instruct other users. If you loan someone this
unit, also loan them these instructions.
3
AU
Advertisement
