Talon AM3030N Owner's Manual page 8

Fuel
tap
Primer
bulb
Fig. 9A
Fig. 9B
14
AU
Turn mower off before adjusting cutting height. The single point cut height control adjusts all four
wheels simultaneously. To operate, steady the mower by grasping the handle with one hand, pull the
lever outwards from the mower with the other hand, and move it to the desired setting.
For heavy or very long grass it is recommended setting the mower cut height to #4 or more to
avoid the possibility of clogging. If clogging becomes persistent because of unfavourable conditions,
try walking slower, cutting a narrower strip or raising the cutting height further.
CUTTING HEIGHT CONTROL LEVER
Fig. 10A
Fig. 10B
15
AU